17-18-archives

May Meeting Added

  • 18 April 2018 |
Hello Sno-Moles, Due to the number of items that are going to take place throughout the summer, we have decided to add another meeting to the schedule. Some are looking at this meeting as the one that was cancelled in March due to the weather. Either way, it will be held at Emma’s 321 on May 8th at 7:00 PM A main topic discussed will be…
Read more...

3-16-18 UPDATE!

  • 16 March 2018 |
Grooming Update: The railbed from Fitzwilliam to Swanzey has been done. Conditions are "good" for the time of year. Beware there are some open water bars and PLEASE.... Stay off all bodies of water, they are not safe. Meeting Update: Next meeting is Tuesday April 10th at Emma's 321. If you have questions, comments, suggestions then you should come. We look forward to hearing from…
Read more...

2018 Annual SnoMoles' Cookout & Poker Run

  • 09 January 2018 |
  UPDATED: 2/15/2018 Unfortunately due to the lack of snow it was decided at the meeting to postpone our annual cookout and poker run. This is a tough decision as many people have put a lot of work into making this happen. We are going to play it by ear depending on snow. So if you see good snow conditions in the area, check back…
Read more...

1-8-18 UPDATE!

  • 08 January 2018 |
Trail Work Party was a success! Trail 404 and 404A (Red Gate loop) got a nice trim on Sunday! It's not perfect, but it's a great start. Thank you to all that came out and helped and to those that stopped by. We have a few pictures posted of the chow portion of the work party, just click the link. Pictures - Trail 404 Work…
Read more...

2018 Reciprocal Weekend

  • 04 January 2018 |
January 26th - 28th, 2018 is the Tri-State Reciprocity Weekend this season. All snowmobiles legally registered in New Hampshire will be able to operate in Maine and Vermont during the reciprocal weekend. All Maine and Vermont snowmobile laws and rules must be complied with, including the Vermont mandatory liability insurance and youth requirements, etc. For information on snowmobiling rules in Vermont, visit: Vermont Association of…
Read more...

Saturday Work Party Update +

  • 04 January 2018 |
Hello All, There will be no work party this Saturday 1-6-18. The forecast is for 0 to -14 temps. It's hard enough for us getting help when it's 50!   Also, as I was out riding yesterday I noticed a number of downed branches in the trails. I also noted a number of sled tracks going around them! We all need to keep in mind…
Read more...

1-7-18 UPDATE!

  • 07 January 2018 |
UPDATE(S): Trail Work Party BACK ON! Trail 404 NEEDS to have some brush/limb cutting done and it cannot wait. So we are meeting TODAY (Sun 1/7) at 9:30 at the Hometown Diner. If you can make it, that would be great. We are also towing the grill out to the area so anyone helping won't have to worry about lunch, we will be grilling up…
Read more...

STAY ON TRAILS!

  • 29 December 2017 |
NOTICE: The trails have not even been open a week and the club is already receiving complaints about snowmobiles riding where they are not supposed to be riding. We’ve mentioned this before a few days ago, but now we’ve heard from the State about the riding along Route 202 in Rindge. They don’t like seeing the sleds tearing up the ground with their tracks as…
Read more...

Trails are open!

  • 28 December 2017 |
Hello All, All of our gates are now open for the 2017-2018 snowmobile season! Things went better than we had planned. Reports of blockages were either cleared when the groomers arrived or not found. This is good news. Again, there are early season conditions throughout the entire system! We do not recommend traveling across any bodies of water at this time as ice thicknesses are…
Read more...

Trails opening!

  • 27 December 2017 |
OK, Our plan at this time is to open our gates in the days leading up to this weekend, December 30th and 31st 2017. It is going to be slow as this wind that we just received has blown a number of trees over and we will not open gates that lead to blow-downs. If you or anyone you know has information about any issues…
Read more...